Have came a crossed several Mitchell Wrenches looks like they are for 396 and488, part number 81500 both are marked Mitchell one does not have 2 nd hole..
Would anyone be willing to trade for 300 Wrenches?
Could not find what the 300 would look like.
Reel Wrenchs
Re: Reel Wrenchs
Goodmorning Schrack, Could you elaborate on the term reel wrenches?
I am new to reel repair and would like to know how you folk find the right screw drivers and wrenches to use to limit damage and scratches. I using automotive tools and I figure that there must be a better option.
I am new to reel repair and would like to know how you folk find the right screw drivers and wrenches to use to limit damage and scratches. I using automotive tools and I figure that there must be a better option.
Re: Reel Wrenchs
Most of the reels came with a wrench that was made for the reels.
Was an option on some where you could buy it.
The 300 wrench is a 12mm socket with a screw driver thru the top.
some of the reels had some funcky looking wrench's
Was an option on some where you could buy it.
The 300 wrench is a 12mm socket with a screw driver thru the top.
some of the reels had some funcky looking wrench's
-
Ted Lanham
- Posts: 258
- Joined: Tue Jun 15, 2021 4:00 pm
Re: Reel Wrenchs
Baron2,
The 300 wrench screwdriver will do the job, and it fits the side plate pretty tight, but if the screws are really tight it can be tough to get them loose without damaging the screws. Early on, I got a about a 6 inch craftsman screwdriver and ground the blade down to where it fit the screws perfect. The screwdriver allowed me to put more force down on the screw when trying to loosen it. Of course, some penetrating oil before trying this is always helpful. There is a youtube video that shows what I'm talking about. https://www.youtube.com/watch?v=Yfw_5-rYKng
Regards,
Ted Lanham
The 300 wrench screwdriver will do the job, and it fits the side plate pretty tight, but if the screws are really tight it can be tough to get them loose without damaging the screws. Early on, I got a about a 6 inch craftsman screwdriver and ground the blade down to where it fit the screws perfect. The screwdriver allowed me to put more force down on the screw when trying to loosen it. Of course, some penetrating oil before trying this is always helpful. There is a youtube video that shows what I'm talking about. https://www.youtube.com/watch?v=Yfw_5-rYKng
Regards,
Ted Lanham
Re: Reel Wrenchs
Nice video Ted.
I to have taken a broken screwdriver to a point (like an ice pick) for hard to get to corners while cleaning.
While there are several tools in my bag, these are 2 I rely on.
I to have taken a broken screwdriver to a point (like an ice pick) for hard to get to corners while cleaning.
While there are several tools in my bag, these are 2 I rely on.
- Attachments
-
- 1.jpg (64.01 KiB) Viewed 3629 times
-
- 2.jpg (150.03 KiB) Viewed 3629 times
-
- 3.jpg (50.94 KiB) Viewed 3629 times
Not home retired and fishing! Or playing with my Mitchell's!
Re: Reel Wrenchs
Don What is bottom wrench used on besides 300,400 series and302N?
I have one like this, plus one that is identical without small cut out.
I think I can make the 300 wrench. (Aircraft mechanics can make anything, LOL)
I have one like this, plus one that is identical without small cut out.
I think I can make the 300 wrench. (Aircraft mechanics can make anything, LOL)
Re: Reel Wrenchs
Schrack,
I got them both from my flea market guy, after seeing them on ebay. I think I paid $9.00 for both. They bottom one I think I have only used to remove the screws on a 300 oscillation guide, and the side plate on the 308.
I got them both from my flea market guy, after seeing them on ebay. I think I paid $9.00 for both. They bottom one I think I have only used to remove the screws on a 300 oscillation guide, and the side plate on the 308.
Not home retired and fishing! Or playing with my Mitchell's!
Re: Reel Wrenchs
I acquired 6 wrench's, believe 4 are for Penn's and two Mitchell one is like your lower photo , other is just like yours only without hex. hole near wrench.
I have several Screw drivers that are perfect for all screws on Mitchells, The face plate is a 12MM so any socket will fit,just becareful not to damage face plate.
I am going to make a special socket, just going to take a deep well 12MM and drill hole near top and put a piece of round stock thru. From the looks of the wrench using the screw driver on wrench would be a bit awkward.
I have a box of parts coming and it has another wrench in with the stuff, mostly washers and bail wires.
Got it cheap.
I have several Screw drivers that are perfect for all screws on Mitchells, The face plate is a 12MM so any socket will fit,just becareful not to damage face plate.
I am going to make a special socket, just going to take a deep well 12MM and drill hole near top and put a piece of round stock thru. From the looks of the wrench using the screw driver on wrench would be a bit awkward.
I have a box of parts coming and it has another wrench in with the stuff, mostly washers and bail wires.
Got it cheap.