Page 1 of 1
1955 300 manual
Posted: Mon Nov 20, 2023 9:50 pm
by Toadman1
Hi....New to the forum. Does anyone have a picture of the manual that came with a 1955 300? I have a very nice example but would like to have a manual to go along with it for my collection. Is it the black cover or something else?
Thanks
Martin
Re: 1955 300 manual
Posted: Tue Nov 21, 2023 7:12 pm
by GreatLaker
Toadman1, Welcome to the Mitchell Reel Museum Forum.
Hello, welcome. The 1955 Mitchell 300 model reels fall right when a new version was coming out. This means you might need either of two different manuals, depending on when your reel was made.
It would help if you could post a clear photo of the handle side of your reel showing the whole reel side. Also, do you know what the serial number is?
Are you looking to see what the manual cover looks like or do you want the schematic (exploded diagram)??
Kind Regards,
Bill
Re: 1955 300 manual
Posted: Wed Nov 22, 2023 6:50 pm
by Toadman1
Thanks Bill, The serial # is 790995. Don't have a pic on hand but it still has the yellow Garcia Product sticker. The reel is pristine.
Martin
Re: 1955 300 manual
Posted: Wed Nov 22, 2023 6:52 pm
by Toadman1
Wanted to add the manual to the reel and box for my collection. Not sure which one to look for.
Re: 1955 300 manual
Posted: Fri Nov 24, 2023 7:52 am
by GreatLaker
Toadman 1,
I believe this may be what you are searching for. This was posted by Wallace Carney here at the MRM on July 2, 2021.
- mrm post 1955 reel.jpg (99.35 KiB) Viewed 8686 times
Kind Regards,
Bill
Re: 1955 300 manual
Posted: Sat Nov 25, 2023 3:32 pm
by Toadman1
Thanks Bill! I have this manual and the one that follows which is the black cover.
Martin
Re: 1955 300 manual
Posted: Sat Nov 25, 2023 7:37 pm
by Toadman1
- PXL_20231122_192028579~2.jpg (132.36 KiB) Viewed 8638 times
Re: 1955 300 manual
Posted: Sat Nov 25, 2023 7:39 pm
by Toadman1
Bill, Finally figured out how to post a pic. I run Linux and had to use Win OS.
Re: 1955 300 manual
Posted: Wed Dec 13, 2023 3:00 am
by Wallace Carney
I see a Really nice job by everyone involved in this thread! Just wanted to say thanks to everyone involved! Regards, Wallace